RC cars have been made for kids only until a few years ago. But the possibilities that those vehicles had attracted many people that saw them as a hobby worth pursuing. This turned RC industry into a business that produced various RC vehicles for kids and adults. Those created for older customers were more sophisticated as well as more powerful which is something that people like.
People started modifying their RC vehicles and that prompted creation of new parts for RC vehicles. New engines were introduced, and that created different types of these “toys.” Right now three
Gasoline-powered RC cars and how they work
The largest and the most expensive RC toys are powered by gasoline. They cost up to three thousand dollars, and they require a lot of space due to their size. Individuals that like meddling with their cars love these because the simplicity of a gasoline-powered engine allows them to repair their vehicles when they break down. The price of parts is also small which gives these RC cars a form of longevity. They don’t have high speed, but the amount of power they bring is something that other types of engines can’t produce.
Individuals that like off-road RC vehicles will find gasoline-powered toys very fun due to their power and the ability to run for a long time and waste very little fuel in the process.
Electric RC models –Classic way to control these toys
Electric RC vehicles are the most common type of these toys on the market. Electronic toys are sturdy and perfect for fast tracks. Many air RC vehicles use electric engines because they are available for everyone and quite cheap when compared to others. People also like electronic speed controllers that come with these toys because they are more reliable and responsive than their mechanical counterparts.
People that like RC helicopters and planes use only toys with electric engines because they aren’t heavy. They are easily controllable which is necessary for high-speed flying vehicles.
Nitro-fueled RC vehicles – How they rate?
RC toys that are powered by nitromethane aren’t as common as other engine types, but they have a following in particular groups of people. The main feature of nitro-powered RC cars is the sound they make and the power they gain from the nitro. Their fuel tanks are limited due to that, but people tend to replace them with large containers.
The price of the nitromethane is high, and that makes running nitro-fueled toys expensive. The cost of parts for an engine that runs on nitro are also high, and that makes these RC vehicles non-profitable for the majority of people that consider RC cars as a hobby.
Electric RC cars are the most popular form of this “toy, ” and thus many people buy them. This, of course, means that many variations are specialized for one type of enthusiasts. You can buy anything from a racing RC to drifting car, and none of them are too expensive to buy and maintain.
All types of electric RC cars
Drift RC cars are the specialized form that has slick tires. This means that drifting around corners will be the fast and satisfying thing to accomplish. Do note that drifting is hard and you can break your RC vehicle if you aren’t careful. Those that master, this form of driving, will find that their RC cars go around a track at the same speed as RC vehicles that don’t drift.
Street RC cars are average cars that should be driven on the flat and paved surface. The majority of cars you will encounter on a race track are of this type. They don’t have a lot of power, but their top speed is superior to other forms.
RC enthusiasts that like to take their machines to off-road terrain prefer RC trucks over everything else. These small monster trucks are boring to control on a flat surface, but they are perfect for extreme terrain which is why they are built to survive off-road terrain. They come with large wheels and good suspension and, if controlled properly, will last for a long while even though you use them on a regular basis.
Some people like off-road RC vehicles and some like those that are excellent on tracks. The third group likes both types, and they opt to buy a buggy or a Truggy. Buggies are RC cars that are built for both terrains, but they are better at flat surfaces, and their high speed is comparable with street RCs. Truggies are just buggies whose tires were replaced with large truck tires. They behave well on rough terrain while their race track abilities are reduced.
Which engine type should you use?
The debate on the best type of engine in RC cars is lasting since their first introduction to the market. The discussion doesn’t include gasoline-powered cars because they are bought and used by a particular type of RC enthusiasts that don’t care about speed.
So, the debate is between electric and nitro engines. The choice between these two is on the buyer and their preferences. Electric motors are cheaper, they require less maintenance, and they have better acceleration. The downside is that they are limited by the battery and its recharge time. Nitro engines will run for longer, and they have better sound. The downside is that they smell bad, you have to buy expensive gas, and they are complex to the point of being unable to repair them alone.
Radio control airplanes have been an enjoyable hobby for many people. It will help you relax and enjoy the freedom these gadgets will offer you. Crashes are typical in this spot, if it happens to you, don’t worry, you can always build a new plane. But, with the adequate training and flight simulation, you will be able to avoid this. If you are passionate about aircraft and you want to learn how to fly them, we hope our guide will help you get familiar with them.
The common things all RC airplanes – radio have
Before you decide to engage in this sport, you need to choose a type of plane you want to build and fly. The most common features all aircraft have are:
Radio transmitter and receiver – these are the main components, and you should never save money on them. They will help you avoid crashes and or worse; you might hurt someone because of the faulty equipment. Radios usually come between two and four channels, they are not separate frequencies, but they are each control. Same goes for radio transmitters, they are on several radio frequencies, and you need to change the matching crystals if you want to establish the connection.
On the other hand, radio receivers which are powered by gas, they use rechargeable batteries. They vary between 4.6 and 6 volts.
You need to choose the direction in which you intend to move control sticks. It should be the same for everything you try to fly, so you don’t have to learn every time to fly a new plane. The controls are usually universal for all aircraft, maybe some of them have some small variations, depending on the brand. Once you learn this setup, you will be able to use even more complicated controls, for more maneuverable aircraft.
Choose the type of airplane
Aircraft which are powered by electricity are usually smaller and quieter. Of course, they come in different shapes and sizes, and you can select a broad range of materials they are built of. There are some pros and cons regarding the electric airplanes. They are quiet, affordable, small and easy to transport. On the other hand, since you powered on batteries, they tend to run out quickly, and if you want to buy large models, they are quite pricey. If you happen to crash an airplane, you should remove the battery as soon as possible and lay on the ground for half an hour. Do not put it in your car, because the fire might occur.
RC airplanes powered by gas are a much better option if you are a true lover of this sport. They have a two cycle high RPM engines which will do the job very nicely. They are designed for bigger planes, they have an upper and longer speed, and the kits are cheap as some of the batteries. The disadvantage of these aircraft: they are noisy, you need to maintain them properly and change oil, and they require a larger take off area. Bigger speed means harder control, in this case, these planes aren’t for beginners.
Many people enjoy flying RC planes, and this has become a very popular hobby. But, before you decide to start with flying, you need to cover some basics. What type of aircraft are you planning to buy, are you ready to invest some money, how will you maneuver it, is it safe for your environment and so on. If you want to become a confident RC pilot, then you need to possess certain types of skills. In this article, we are going to discuss the basic of the flying and get you familiar with RC planes.
How does RC aircraft works?
There are two main components of every airplane, transmitter, and receiver and RC stand for radio control. The receiver is located on the plane, while you have the transmitter in your hands, while you try to maneuver the airplane. These two are closely connected because receiver receives the radio signal from the transmitter. All radio signals operate on a particular frequency, which is commonly measured in kilohertz, megahertz, and gigahertz. The transmitter and receiver need to operate on the same frequency in order to work together, and the gadget that determines which frequency the radio system is using is called crystal.
How RC aircraft moves and turns?
Once you learn everything about radio signal, it’s time to find out how to move and turn your airplane. All planes have control surface which is located on the flying surface. Various control surfaces have different purposes, but the primary ones are rudder, elevators, and ailerons. The commonly used airplanes have rudder control, this is a movable section placed on a fin and at the rear end of the plane. It has the power to control left and right turns. The elevator control has the ability to point the nose of the aircraft up and down, while the ailerons are located on the wings, usually at the wing tip, and they control the roll of the airplane.
Number of channels
Every operation you conduct with RC aircraft is called a channel. The most basic planes only have one channel, while more advanced have two or more. If you want to experience the pure thrill of flying a plane, you should get an aircraft that has at least three channels. The fourth channel will have a motor power, rudder, aileron, elevator and wireless control. The vast majority of sports planes have 3, 4 or 5 channels.
Trainer RC aircraft
If you want to learn to fly these type of planes, the best option would be to use a trainer airplane. They have the best features which make them stable and easy to fly. In this case, you can buy it, or you enroll in some school which can teach you the basics. It is up to you to decide what is a more affordable option. High-wing airplanes are best for the training purposes; they are well balanced and forgiving. This type of plane will always want to level itself naturally.
This decision shouldn’t be taken so lightly, after all, you will be your time and money. When the time comes to buy an RC plane, one of the first things you will need to learn is how to fly it and how to avoid crashes. If you want to start this hobby, then you should choose thinner airplanes, which are best for the learning experience. You will be able to maneuver it easily, it is very stable and doesn’t create big noise. But, what happens when you need to decide on the size, power type, form, and construction? We are going to help you choose the best aircraft for your needs.
Make your priorities
It is important to know what you want, do you want this to be your hobby, or do you want to engage in this sport professionally. For hobby option, you don’t need an expensive RC aircraft; you can buy one which is powered by electricity. They are very convenient, easy to managed and you will have a great time flying them. On the other hand, if you take this sport too professionally, then you will need an RC plane which is powered by fuel. They are much stronger and faster, and with them, you will experience the real thrill of flying.
The plane size is usually determined by the wingspan, or the length of the wings, from one tip to another. If you don’t know which size is right, then you should be aware that abound 50 inches is considered a good one. But, these measures largely depend on the areas in which you plan to fly an RC aircraft. For small space, you will need a smaller plane, or opposite to this something larger. The typical electric planes fall into this category; same goes for trainers. Their size varies between 40 and 60 inches.
At this point you may already know whether you want to pilot an IC or EP, this all depends on your personal preferences. For example, if you are restricted by the space, and you are maybe limited to fly in public areas, such as parks, then the best option for you would be an electric plane. They make a big noise. Usually, they are soundless, you don’t need an excessive accessory, and generally speaking, they are much affordable. On the other hand, if you want to pilot an IC plane, then you will need to join the club.
In this case, your choice is between balsa or foam. Many people decide to buy an electric foam plane because it is convenient, cheap widely available and easy to repair. However, balsa airplanes can be resistant, but if they suffer some crashes, the damage will be bigger, and they can be more complicated to repair. If you are looking a way to have some fun and to spend an enjoyable day in nature, our advice would be to choose a foam EP.
Choosing your first radio control plane can be a very exciting experience, no matter what age you are. You will have a vast choice, but first, we need to clarify what defines a beginner RC plane. They don’t have some specific features, but they are usually slower, simple to operate and very stable in flying and in addition to this, very durable. The beginner plane is also known as a trainer aircraft. If you want to start with this hobby, then a beginner airplane is your best choice. You won’t have a hard time building it, and it is much easier to manage.
High – wing beginner favorites
When a plane has, its wings placed on top of the fuselage, then this plane is called a high – winger. They are other more stable in flying which makes them perfect for beginners. One of the widely-spread models is the Piper Cub or its variants. One of the bestsellers in the recent years has been a Super Cub from HobbyZone. It has kept its original design, but they have made some new adjustments and updates. The sports Cub 5 has already proven its popularity as the original version of this RC plane. The manufacturer has implemented a stabilization technology which makes this plane easier to control.
Another RC aircraft which is widely popular is Champ. It comes from the same company as Super Cub; it is highly affordable, small in size and it has proven to be a win – win combination for beginners. To be honest, a small size isn’t always good when you are learning, but if you operate on a tight budget, it can be convenient.
Beginner RC planes, 3 or 4 channels?
This is a very common question we receive every day, should beginners choose 3 or 4 channel RC aircraft? The number of channels means the number of functions. Three channel plane will have a control to motor power, rudder and elevator, in some cases, you will get an aileron control instead of rudder. On the other hand, four channel will have all these options motor power, rudder, elevator and aileron. An example of this type of a plane is the E – elite Apprentice S 15e.
Essentially, once you master a three channel, you won’t have that much fun piloting this plane. The exception to this are planes which have an aileron control instead of rudder. They are more aerobating in the air and more exciting to fly. There are always pros and cons, but if you choose three channel plane, you will learn to fly faster, while four channel will provide you more fun afterward. It all depends on your preferences and what do you enjoy more.
A good alternative to a high wing trainer is an electric power glider, like Hobbyzone Conscendo. A glider like this can provide you stability and plenty of time to react. In this way, you will avoid crashes. You can choose between different styles and sizes. It is beginner – friendly because it contains SAFE technology.